B10 / Charging & battery

Leapmotor B10 range looks optimistic: Standard versus Dynamic display

A distance estimate is not a guaranteed route length. Choose a consistent display mode and plan with battery percentage, conditions and a charging margin.

3 min readReviewed 27 October 2026

2025 manualB10 BEV infotainment / fitted equipmentAustralia · export specification

CHECK YOUR CARB10 BEV · Australia English documentation · June 2025 manual · export equipment only

Checked against the English BEV manual linked below. China-market reports identify the owner question; they do not establish an export defect, a recall or a guaranteed fix. Match the handbook and equipment in your car, and follow current on-screen instructions where software differs.

THE QUICK ANSWER

Open Settings → Charging and find Driving range condition. The checked B10 manual lets you choose Standard or Dynamic. Changing the display mode changes the estimate presented; it does not add battery capacity.

The China-market owner report

A Chinese B10 owner’s settings checklist recommends the dynamic range display. This is an owner preference; domestic CLTC figures and that post’s advice do not predict the distance an export car will cover.

Before you start

Check the mode while parked. Keep reserve energy and suitable charging stops in your route plan, especially in cold weather or at sustained higher speeds.

What to check

1Read battery percentage firstNote state of charge alongside displayed distance. Do not diagnose battery degradation from estimated kilometres alone.
2Find the display settingOpen Settings → Charging and locate Driving range condition. Note whether Standard or Dynamic is selected.
3Choose and compare consistentlySelect the mode you want and keep that same mode when comparing later trips. Do not compare one mode’s departure number with another mode’s arrival number.
4Plan using actual conditionsAccount for speed, temperature, heating and load. If real consumption changes sharply or warnings appear, keep a journey log for the dealer.

Tick steps as you go. Your progress stays in this tab.

Check the result

A more useful estimate helps planning but cannot guarantee arrival. The manufacturer lists driving habits, temperature, charging and storage conditions among factors affecting range.

Common questions

Does Dynamic unlock extra range?+

No. It is a display selection, not an increase in stored energy.

Can I compare a Chinese CLTC claim directly with my trip?+

No. Market specification, test cycle and real conditions must be considered.

SOURCES & SCOPE

Where this guide comes from

Operating steps are checked against manufacturer documentation; Chinese owner discussions are labelled as anecdotal reports. They identify questions, not the prevalence or cause of a fault. Reviewed on 27 October 2026. This is a source-based guide, not a claim of hands-on vehicle testing.

Read our editorial policy

Ready for the next small job?Explore all guides