EX90 / Displays & settings

How to adjust the Volvo EX90 head-up display

2 min readReviewed 25 October 2026

2025UK

CHECK YOUR CARVolvo EX90 2025, UK online manual (24w36), as reviewed 25 October 2026. Match the menu labels and installed software in your car.

Applies only to cars equipped with a head-up display. Perform adjustments while parked.

THE QUICK ANSWER

Head-up display brightness and position are adjusted in the Lights and displays section of vehicle controls. After opening the adjustment page, use the steering-wheel buttons as directed. Set it from your normal seating position while parked so the projected information is comfortably visible.

Step by step

1Set your seating positionPark and sit in your normal driving position before adjusting the projection. Tap the car icon in the bottom bar, then open Settings.
2Open the adjustment screenSelect Controls → Lights and displays → Adjust head-up display.
3Use steering-wheel controlsAdjust the projected display’s position and brightness with the steering-wheel buttons, following the on-screen guidance. Check readability before driving.

Tick steps as you go. Your progress stays in this tab.

Common questions

Are position and brightness both adjustable?+

Yes. The cited EX90 procedure covers both settings.

SOURCES & SCOPE

Where this guide comes from

Written from the official references below, reviewed on 25 October 2026. This is a source-based guide, not a claim of hands-on vehicle testing.

EX90 Adjusting the head-up display — Volvo Support UK ↗

Read our editorial policy

Ready for the next small job?Explore all guides

How to adjust the Volvo EX90 head-up display

Step by step

Common questions

Where this guide comes from

More help for your car.

How to restart a frozen Volvo EX90 screen

How to change the clock and time zone in a Volvo EX90