7X / Displays & settings

How to switch Zeekr 7X range between Dynamic and Standard

An estimated range figure is meaningful only when you know what it represents. Check the display mode before comparing it with recent driving or another owner’s number.

3 min readReviewed 27 October 2026

2025Zeekr 7X export software; equipment dependentEurope

CHECK YOUR CAR2025 Zeekr 7X · Europe English online manual · Long Range RWD reference

Checked against the official European English MY2025 7X online manual on 27 October 2026. China-market apps, hardware and OTA versions differ. Match your car’s display and equipment; the Chinese report supplies context, while the manufacturer manual supplies the procedure.

THE QUICK ANSWER

Open Energy management → Charging and choose Dynamic for a recent-driving estimate or Standard for the manual’s WLTP-based estimate. The choice updates both displays.

Chinese owner report: context, not a diagnosis

The owner describes reduced range and slower charging in sub-zero conditions. This is an individual report or discussion, not evidence of a widespread defect. The checks below concern the European export car; they do not establish what caused the Chinese owner’s symptom.

Before you start

Park and note the remaining charge percentage as well as the displayed distance. A change of calculation method does not add energy to the battery.

Follow the export-car controls

1Open the range settingUse the car-settings menu → Energy management → Charging on the centre display.
2Choose the estimate typeSelect Dynamic if you want the display to reflect recent driving style, or Standard for the WLTP-based figure described in this export manual.
3Compare like for likeCheck the driver display and Energy management view after the selection. Both use the updated estimate. Record which mode was selected when comparing trips.

Tick steps as you go. Your progress stays in this tab.

Check the result

Treat the result as a planning estimate, particularly in cold weather. A Chinese owner’s CLTC range discussion is not a directly comparable European WLTP figure. Keep enough charging margin for the actual route and conditions instead of assuming the displayed distance is a guaranteed remaining journey.

Common questions

Does Standard use China’s CLTC figure?+

The cited European manual describes Standard as based on WLTP. China-market figures must not be substituted.

Did selecting Dynamic reduce my battery charge?+

The documented change concerns the estimated range shown, not a change in stored energy. Read the charge percentage separately.

SOURCES & SCOPE

Where this guide comes from

Operating steps are checked against manufacturer documentation; Chinese owner discussions are labelled as anecdotal reports. They identify questions, not the prevalence or cause of a fault. Reviewed on 27 October 2026. This is a source-based guide, not a claim of hands-on vehicle testing.

Read our editorial policy

Ready for the next small job?Explore all guides