How to use reverse mirror tilt in a Kia EV2
The mirror-selector position determines whether an equipped EV2 lowers its mirrors when Reverse is selected. A neutral selector can therefore explain why they stay at their normal angle.
Checked against the MY2027 English owner manual for this model on 27 October 2026. Equipment and software can differ; use the instructions and controls fitted to your own vehicle.
For the documented reverse parking aid, select L or R on the mirror-adjustment switch. Both outside mirrors tilt down when the car is in Reverse; leaving the selector neutral prevents that tilt.
Before you change the setting
Check that the car has the reverse parking aid equipment. Set the selector while parked, keep the brake applied and check the surroundings before selecting Reverse. Mirror tilt supplements the normal checks needed for reversing.
Work through the controls
Tick steps as you go. Your progress stays in this tab.
Check the result
The manual lists leaving Reverse and deselecting the mirror switch among the conditions that return the mirrors to their original position. If only the switch position changed, check it before assuming that a mirror motor has failed.
Common questions
Does L mean only the left mirror tilts?+
In this EV2 procedure, choosing either L or R makes both outside mirrors move.
How do I prevent the automatic tilt?+
Keep the outside-mirror selector in its neutral position.
SOURCES & SCOPE
Where this guide comes from
Written from the official references below. Reviewed on 27 October 2026. This is a source-based guide, not a claim of hands-on vehicle testing.
Read our editorial policy