B10 / Displays & settings

How to show the Leapmotor B10 surround camera with turn signals

The export B10 manual documents a turn-signal-linked camera setting. You do not need to recreate an automation shown in a Chinese owner’s app.

3 min readReviewed 27 October 2026

2025 manualB10 BEV infotainment / fitted equipmentAustralia · export specification

CHECK YOUR CARB10 BEV · Australia English documentation · June 2025 manual · export equipment only

Checked against the English BEV manual linked below. China-market reports identify the owner question; they do not establish an export defect, a recall or a guaranteed fix. Match the handbook and equipment in your car, and follow current on-screen instructions where software differs.

THE QUICK ANSWER

Open Settings → Smart Driving → Assisted Imaging and enable Steering Assist Image. When its conditions are met, using the turn signal opens the documented side/rear 3D surround view. Continue checking mirrors and the road directly.

The China-market owner report

A China-market owner discusses turn-signal-linked 360 views and other customised scenarios. This guide uses only the export handbook’s Steering Assist Image control, not its unrelated domestic automations.

Before you start

Set it up while parked and confirm your B10 has the required camera equipment. A camera image has blind spots and can be affected by dirt, weather and lighting.

What to check

1Open Assisted ImagingGo to Settings → Smart Driving → Assisted Imaging. Read the available controls for your fitted system.
2Enable Steering Assist ImageSelect the turn-signal-related imaging function. Do not confuse it with Start Assist Image or Ramp Assist Image, which have different triggers.
3Check the view in a safe situationObserve the result when using a turn signal under suitable conditions. Keep attention outside the vehicle; do not stare at the screen while manoeuvring.
4If it does not appearCheck equipment and the selected setting, and read any camera warning. Have persistent blank or faulty views inspected rather than relying on an unofficial scenario script.

Tick steps as you go. Your progress stays in this tab.

Check the result

The useful result is the intended side/rear surround view appearing when supported. It is supplementary information and does not establish that a blind spot or junction is clear.

Common questions

Is this the same as a blind-spot warning?+

No. Displaying a camera view and detecting a collision risk are different functions.

Should I copy every automation from the Chinese post?+

No. The article verifies only this export-manual camera control.

SOURCES & SCOPE

Where this guide comes from

Operating steps are checked against manufacturer documentation; Chinese owner discussions are labelled as anecdotal reports. They identify questions, not the prevalence or cause of a fault. Reviewed on 27 October 2026. This is a source-based guide, not a claim of hands-on vehicle testing.

Read our editorial policy

Ready for the next small job?Explore all guides